Wolf PW302418 Instalační příručka stáhnout pdf (Strana 3)

Wolf Pro Wall Ventilation Hoods 3

wolfappliance.com/specs

Pro Wall Hood Installation

IMPORTANT NOTE: T

his installation must be completed

by a qualified installer or Wolf factory certified service.

Read this entire installation guide and blower installation

instructions prior to installation and save for the local

inspector’s reference. The homeowner should keep this

installation guide for future reference.

This appliance must be installed in accordance with

National Electrical Codes, as well as all state, municipal

and local codes. The correct voltage, frequency and

amperage must be supplied to the appliance from a dedi-

cated, grounded circuit which is protected by a properly

sized circuit breaker or time delay fuse. The proper

voltage, frequency and amperage ratings are listed on the

product rating plate.

Record the model and serial numbers before installing the

ventilation hood. Both numbers are listed on the product

rating plate, located inside the left wall of the hood. Refer

to the illustration below.

olf Pro Ventilation Hood

Model Number

Serial Number

Location of rating plate

(inside hood).

RATING PLATE

1 2 3 4 5 6 7 8 ... 19 20

Žádné komentáře

Wolf PW302418 Instalační příručka Strana 3