Wolf CTEWH45I Průvodce řešením problémů stáhnout pdf (Strana 14)

WOLF COOKTOP LOW-PROFILE HOODS

FIXING THE TELESCOPIC FLUE

Insert the air baffle (F) in the structure as

shown in illus 24.

Through the openings (E) shown in illus 25,

fit the flange (G) to the baffle (F) locking it with

a turning movement.

Fix a flexible pipe to the flange (G) for air

evacuation as shown in illus 25.

Take the upper flue (with the round slots) and

slide it on the telescopic flue with the slots

facing upwards; attach the flue to the bracket

with two screws as shown in illus 26.

Take the lower flue and slide it over the upper

flue, to the top and secure it in that position

using adhesive tape.

Take the reduction (L) as shown in illus 27 and

assemble it onto the air venting opening of the

hood, pressing slightly.

Illus. 24

Illus. 25

ISLAND HOODS – RECIRCULATING

IMPORTANT NOTE:

The recirculation kit

must be purchased separately for recirculating

installations.

IMPORTANT NOTE:

This installation must be

completed by a qualified installer or Wolf

authorized service center technician.

Locate the electrical supply through the ceiling

inside the area of the flue.

FIXING TO THE CEILING

Follow the same steps for attaching the hood

to the ceiling as outlined on page 12.

Illus. 27

Illus. 26

3.9 x 9.5mm

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Žádné komentáře

Wolf CTEWH45I Průvodce řešením problémů Strana 14